|
|
Documentation :
All our products have been
designed with the aim to enable us and our customers o be able to
reuse the designs as far as possible. One of the key issues with regards
to reuse is documentation. You can see some of the documentation
available on the libraries and drivers written by us for different
products
STEPLIB
This is a C library with routines for a 3 axis stepper
motor controller card the routines include
independent control of all axes, linear interpolation, circular interpolation,
input/output handling, etc.
SERVOLIB
This is a C library with routines for a 4 axis servo motor
controller card the routines include independent control of all axes, linear
interpolation, circular interpolation, input/output handling, etc.
STEPSER
This is a C library with routines
for serial port driven intelligent drive modules and Digital input/output
modules the routines include independent control of 31 different controllers
on an RS 485 bus, broadcast functions, etc.
CNC
This package is a graphic package
that brings ISO standard G-codes to a PC-Based motion control system features
include ISO standard G-codes, graphics, Dry runs, canned cycles, etc. are
available.
DXFREAD
A PC-based software package that allows the user to take
in DXF format input and convert it to standard G-code format. The output
from DXFREAD can be directly fed into a CNC controller.
VLASER
This document describes a simple structure for controlling
a laser power controller the controller
is connected to the controller supplied by the laser laser manufacturer
and to the user’s PC using a RS 485 serial port the user can set the power
by setting pulse width and time period, trigger the laser on fly, etc.
IMC-LISP
This document describes a MACRO
language for controlling a single axis motion controller used for packaging,
cut-to-length and similar applications. Even a programming-unaware user
can use this MACRO language to powerfully use the controller.
|
